Product Details
Product Description
This 1000W Pure Sine Wave Inverter uses a thyristor circuit to convert direct current into alternating current. It avoids the electromagnetic pollution problem in the power grid, and can output sine wave AC power that is the same as or even better than the power grid we use daily, with high quality and stable efficiency, which can drive most loads without interference. It is widely used in power, communications, industrial equipment, satellite communications equipment, military vehicles, medical ambulances, police cars, ships and other fields.
Features
1000W Pure Sine Wave Inverter features its high-quality AC power to solve all kinds of severe power supply needs. It is equivalent to a mobile power station, which can be used in multiple scenarios. It has excellent heat dissipation function, aluminum alloy shell, wear-resistant and anti-fall. It uses high-quality, selected raw materials to achieve stable, reliable mechanical and electrical properties.
1000W Pure Sine Wave Inverter also integrates various functions and settings, including low battery warning prompt, output overcurrent protection, low voltage protection, anti-overcharge protection, and good energy-saving functions. Its upgraded version of the circuit chip is safer and more reliable, with stable voltage and improved conversion rate.
Electrical specifications
|
Models |
PROsine 1000 |
PROsine 1000i
|
Output power |
1000W |
Surge rating |
1500W |
Output current (peak) 25A |
25A |
Output voltage (at no load) |
120Vac+/-3% |
230Vac RMS+/-3% |
Output voltage (over full load and battery voltage range) |
120VacRMS-10%/+4% |
230VacRMS-10%/+4% |
Output frequency |
60+/-0.05(crystal controlled) |
50+/-0.05(crystal controlled) |
Output waveform |
True sine wave(<3%THD) |
Peak efficiency(12v/24v) |
89%/90% |
No load power draw(search mode) |
<1.5W |
No load power draw(idle mode) |
<22W |
Input voltage range(12v/24v) |
10-16Vdc/20-32Vdc |
Transfer relay rating (hardwire/transfer relay models) |
15A |
Transfer time AC to inverter and inverter to AC |
Max 2 cycles(typically 1 cycle)<2.5 seconds with Powersave ON |
General specifications
|
Operating temperature range |
32℉-140℉(0℃-60℃) |
Storage temperature range |
-22℉-158℉(-30℃-70℃) |
Ac output types |
Dual GFCI receptacle |
Hardwire |
Hardwire with transfer relay |
LCD display panel |
Removable; can be mounted remotely |
(requires remote interface kit-see part number section) |
Displays DC volts, amps and output power |
Recommended DC fuse |
12V:150A or 175A* |
24v: 70a OR 90A* |
*Depending on applicable installation codes |
Dimensions(H*W*D) |
4.5*11.0*15.4 (115*280*390) |
Weight |
14.5lb (6.5kg) |
Warranty |
Tow year |
Part numbers |
|
12-volt |
|
GFCI outlet |
806-1000 |
Hardwire with transfer relay |
806-1002 |
24-volt |
|
GFCI outlet |
806-1050 |
Hardwire with transfer relay |
806-1052 |
Remote interface panel |
808-1800 |
Wiring cover |
808-1801 |
http://www.fangpusun-inverter.com/